Natural stone paths are a special feature for your garden in the garden design, natural stone paths are an important dividing element. Paths connect not only but are also physical separation of different used garden areas. The materials can be quite different origin, shape, color and texture. Sheets of slate, granite, basalt, Greywacke, quartzite and sandstone are very popular. As paving stones from basalt, marble, granite, and sandstone, which are available in different sizes. Read more from David Fowler to gain a more clear picture of the situation.
You can use but also natural stones or reading stones, that have irregular shapes. A great advantage is that the stones are extremely robust and withstand wind and weather. Creating a stone path requires planning and preparation. Not only the paving material used in sufficient quantity, therefore the width and the length of the path should be already set. Also the base is very important, the other properties of the stone path depend on him. This is a 20 cm thick Soil layer and the substrate is, compacted using vibratory plate,.
On the compacted surface comes a layer of coarse gravel, then a layer of fine gravel and finally an approx. 5 cm thick sand bed with natural stone slabs in natural stone paving fine grit. The base is so prepared, can be started with the installation or paving. When installing itself, you should pay attention to joints evenly. It has now moved the plates or the paving stones for the stone way, the joints must be filled. This will correspond to the base Vice a sand or fine gravel with a broom. Also flooding is possible. Actually, the trail is now complete. But you should give some time to set, before using, may be we have to sprinkle more grout and go up. Full joints dampen horizontal forces and it will not be jiggling stones or tilting plates. Carsten Ludwig