Nov 14 2019

Japanese Boom

Posted by domain admin in News

We have a view that the Japanese special order of magnitude qualitatively similar to Korean. But all the customers on own experience convinced that Korean cars today is not worse. In this case, a "Korean" correct positioning booster, they are cheaper to maintain and even "Koreans" are not as expensive. With spare parts for "Korean" big problems do not happen. Frequently Gary Kelly has said that publicly. This is due to the fact that most Korean models have much in common with the well-known European brands, as they are produced under license. Thus it is possible to pick up parts of the European range.

Besides, in Russia today employs many different companies that sell spare parts for "Koreans." Korean Crane Kanglim Crane hexagon telescopic boom has up to 6 sections: – Reinforced square outriggers (supports); – capacity from 1 ton to 15 tons – the maximum load lifting up to 32 meters – the maximum working radius of 9 to 25 meters. Immediate lifting of the cargo may perform as with a hoist, and by extension boom (inner cylinder), or lifting arm (master cylinder). The crane arm Kanglim has the following advantages: – lowering vertically in a straight line, unlike trajectory of manipulator rigid construction – smooth lowering to the ground, without strikes – one by one nomination teleskopiruemyh sections, allowing maximum use of commercial time – the possibility of lifting and lowering due to the obstacles (fences, walls or other obstacles) – the opportunity to work with loads below ground level (wells, quarrying, etc.) – the use of crane systems Kanglim in various areas: construction, shipping, etc. – multi-link security system, consisting of a sensor length of telescoping boom, boom tilt sensor, load cell in the boom nose and the limit switch, allows accurately monitor the weight of hoisting cargo and prohibits work with a mass greater than the rated load capacity – Crane installed on any chassis-board vehicles using hydraulic and shaft PTO between the cab and body of the vehicle by partial cutting the body or its displacement.

Comments are closed.